Agricultural rotary tiller: the right hand of modern agriculture

    With the continuous advancement of agricultural modernization, agricultural machinery plays an increasingly important role in improving production efficiency and reducing labor intensity. The rotary cultivator, as an efficient and multi-functional agricultural machinery, has become an indispensable tool in modern farmland farming. It can not only quickly complete the land ploughing, breaking, leveling and other operations, but also effectively improve the soil structure and create good conditions for crop growth.
    Rotary tiller plays an important role in agricultural production, it can not only improve soil quality, control weeds, but also improve the efficiency and yield of agricultural production. It improves soil ventilation, water retention and drainage by turning and mixing the soil. This helps improve soil fertility and provides a better environment for plant root growth. At the same time, by loosening the soil, the rotary tiller can also bury the remains of weeds and pests, reducing their competition and spread to crops. It can also effectively control the growth of weeds. By turning the soil, the rototiller can bury the weed seeds deep in the soil, reducing the germination rate and reproductive ability of the weeds. In addition, the rotary tiller can also cut the cover of the weeds that have grown, and play a certain degree of weed suppression. And it can quickly and thoroughly tidy up the land, creating good conditions for the cultivation of crops. By tilling and crushing the soil, the rototiller removes clumps and impurities from the soil and provides a flat planting bed. This makes it easier for farmers to carry out planting operations, improving crop quality and yield. Compared with traditional manual farming, rototillers can prepare the land quickly and efficiently. It can save a lot of labor and time and improve the efficiency of agricultural production. Especially in the cultivation of large areas of farmland, the use of rotary tillers can significantly improve work efficiency and reduce human input.    Please note a few points when doing rotary tiller farming:
    First, maintenance before operation: (1) Check the gearbox. Check the gearbox gear oil, lower than the oil surface line to add the same type of gear oil; Check the gap between the gears, especially the meshing gap of the bevel gear, the gap is too large or too small will cause failure; Check the gap between the transmission output spline shaft and the tool sleeve, and replace the set when the wear is serious. (2) Check the knife part. Check the oil seals at both ends of the tool shaft, as well as the tool shaft, tool holder and blade. If damaged, replace it with a new part. When replacing the blade, periodically tighten the bolts fixing the blade in the direction of the double helix. The tractor must be turned off while rotating parts such as blades are being replaced. (3) Check the rotary tilling knife. Check whether the rotary blade is installed in the opposite direction, and whether the fixing bolts and universal-joint lock pins are secured. (4) Tractor inspection. When connecting, pay attention to match the height of the box, the height of the box cannot be wrong. Note the Angle between the power output shaft and the input shaft of the rotary tiller, and the Angle should be less than 10 degrees. The transverse shaft and bearing of the transmission shaft can not be loosened, rotate flexibly in all directions, and add grease; The rotary tiller should rotate horizontally, and the input shaft should be on the same center line as the tractor power output shaft.
    Second, maintenance in operation: (1) Before the tractor starts, the clutch handle of the rotary tiller should be moved to the separation position. When the power is engaged in the lifting state, the unit can be started after the rotary tiller reaches the predetermined speed, and the rotary tiller slowly drops to make the rotary tiller knife into the soil. It is strictly prohibited to start the rotary tilling knife directly in the soil, so as not to damage the rotary tilling knife and related components. It is strictly prohibited to throw the rotary tiller quickly, and it is strictly prohibited to slip and flip the rotary tiller after it falls into the soil. (2) In operation, if the cutter shaft is too wrapped by grass, it should be stopped in time to clean up, so as not to increase the machine load.
    Third, safety operation tips: (1) when the ground rotation does not cut off the power, the rotary tiller shall not be lifted too high, the transmission Angle at both ends of the universal joint shall not exceed 30 degrees, and the engine speed should be properly reduced. (2) When rotating block or long distance walking, the rotary tiller power should be cut off and locked after rising to the highest position. (3) When the rotary tiller is running, personnel are strictly prohibited from approaching the rotating part, and there shall be no personnel behind the rotary tiller to prevent the blade from throwing. (4) When rotating farming, the tractor and the suspension part shall not bring people to prevent accidental injury by the rotary tiller.

    Our own factory produces various series of rotary tillers, including RX,TB,KRM,RZ and other series, with a complete production line, support customization, suitable for various types of tractors, customers place large orders all year round, and give praise. As an important tool of modern agriculture, the rotary tiller not only improves the efficiency of agricultural production, but also creates good conditions for soil improvement and crop growth. With the continuous progress of technology, the rotary tiller will play a more important role in the future agricultural production, providing strong support for agricultural modernization and sustainable development. Welcome to visit the production plant, come to buy!